Over 10 years we help companies reach their financial and branding goals. Engitech is a values-driven technology agency dedicated.

Gallery

Contacts

411 University St, Seattle, USA

engitech@oceanthemes.net

+1 -800-456-478-23

GLUCOCARD Expression Meter

This article assumes you have:

  • An endo.digital account– If you don’t have an account, ask your healthcare provider to send you an invitation to endo.digital.
  • Installed the latest version of the endo.digital Uploader – if you have not installed the endo.digital Uploader, you can download the latest version at https://dreamed-diabetes.com/uploader.
  • A GLUCOCARD Expression data cable to connect your Arkray GLUCOCARD Expression meter to your computer. Contact Arkray Support at 1-800-818-8877 and use extension 4301 to obtain a cable if you need one.

1.     Connect your device

  • Before connecting your Expression meter into your computer via the cable, follow these steps:
    • Press and hold Enter (|) to turn the meter on.
    • Press Enter (|) to open the Setup Screen.
    • Press the > button once to navigate to the PC Link Mode.
    • Press (|) to select PC Link Mode. Wait until you see “PC” blinking on the meter screen.
  • Now plug the data cable into your Expression meter into one of the USB ports on your computer.
  • Launch endo.digital Uploader and log into your account.
  • Confirm “GLUCOCARD Expression” is one of your devices. You can change your devices by selecting “Choose Devices” from the menu under your name.

2.     Upload

  • Confirm endo.digital Uploader is set to the time zone that matches your location.
  • Click “Upload” to upload the data from your meter.

3.     After Uploading

  • When done, unplug the data cable from the computer and meter.
  • Press > button to get out of the PC Link Mode, and then hold Enter button to switch the meter off.

If you need further assistance, contact DreaMed support: support@dreamed.ai
www.dreamed-diabetes.com

MKT-12153, Last updated on: June 19, 2023

Contact us